Base timing help
03-20-2019, (Subject: Base timing help ) 
Post: #10
RE: Base timing help
(03-19-2019 )Unilevers Wrote:  they knock like crazy when you first start them as there is no fuel in the IFSM and lotsa air. Let it idle for about 10 minutes and it will smooth out. I hope you used loctite on the cam gears and followed the procedure right or it will slip

let it idle for a few, they sound terrible on first startup
I did not use loctite but I still have the front cover off so I'll pull the gears again and use it I'm thinking its 609 but I'll check it again.
replyreply


Messages In This Thread
Base timing help - Swaid25 - 03-19-2019,
RE: Base timing help - Swaid25 - 03-19-2019,
RE: Base timing help - hhow55 - 03-19-2019,
RE: Base timing help - tree98 - 03-19-2019,
RE: Base timing help - Swaid25 - 03-19-2019,
RE: Base timing help - Unilevers - 03-19-2019,
RE: Base timing help - Swaid25 - 03-20-2019
RE: Base timing help - Swaid25 - 03-20-2019,
RE: Base timing help - Rawze - 03-20-2019,
RE: Base timing help - Swaid25 - 03-22-2019,
RE: Base timing help - Rawze - 03-22-2019,
RE: Base timing help - Swaid25 - 03-23-2019,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.