My Pete rebuild

[Nostalgic]

I disabled it and it will spin 2100 now, but still needs some work. Max boost is 28-29 (didn't have insite hooked up to monitor load), but it's still sluggish. Not sure if I can point at closing limits, or to torque (or lack thereof). Comparing it to the small sample of what I have run, it feels pretty close to a 435 N14. Running Route 66 from Kittanning to 80 is a pretty good test ground, and I'm pretty confident in expectations for the stretch. I'm sure I wouldn't be too impressed with 50k on the deck, but I've had less than 300 miles play time so far. I lucked into some local work to get my feet wet again, so if I have to get out and push up hills, at least it'll only be a day at a time haha.