Another big red headache

[Lonestar10]

I measured the boot length and for the LoneStar they do come in at correct lengths i could see for a Prostar or other model you might need to cut 1 ring off and shorten the hose or modify connector pipes...

For me i think i would just modify the hose as far as i can tell they are not a set molding for size just a piece of 4" silicon carny hose cut to fit with the metal rings helping from the opening in center from become a big ole bubble. For stuff like the prostar i might just take the metal rings off old boots and cut new boot to fit and install rings on new boot if not modify the 3 ring then pay 30-40 more per boot/clamp combo at international.

4 states also sent me 2 packages of 4 radiator "mounts" which i beleive are used to mount the CAC to radiator. little rubber isolators with a steel core inside so technically vibration dampners