Crankcase pressure

[race7820000]

(04-08-2019 )Rawze Wrote:  couldn't a person pull the rockers and actuate the intake valves by hand, measure the static flow rate for each cyl after it pressurizes the chamber with an EVAP machine (or a cheap welding machine flow meter)?.

just a curious thought.

Only if you drink a Busch light in between each cylinder lol jk well half kidding.

I had to Google what a EVAP machine was. Lol that's a good idea. I bet I could find the cylinder(S) with the problems. As loud as the air leaks sounds by the fill tube I imagine it would show up pretty easy.