Milky in oil fill tube
04-09-2019, (Subject: Milky in oil fill tube ) 
Post: #6
RE: Milky in oil fill tube
(04-09-2019 )Rawze Wrote:  pressure it up with 20 psi to the coolant system with the oil pan off it and let it sit over night. - bar engine next day slowly and listen for gurgling around piston rings, and give good inspection for coolant seepage around liners etc.

I wish I had the facility to do that but unfortunately I’m not allowed to do that kinda work in the yard. I will pressure test it. Thanks fellas.
replyreply


Messages In This Thread
RE: Milky in oil fill tube - Unilevers - 04-09-2019,
RE: Milky in oil fill tube - shawnkw - 04-09-2019



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.