Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Ask Your question... / Crankcase pressure

new reply
Crankcase pressure
04-14-2019, (Subject: Crankcase pressure ) 
Post: #22
Lonestar10 Offline
HMR-Contrinbuting V.I.P.  (1213 Likes)  *****

 		Posts: 1,873
Joined: Oct 2018
Thanks: 13
Given 1213 thank(s) in 780 post(s)
RE: Crankcase pressure
Looks like turbos been sucking a small amount of dust starting to erode the edge of blades make sure whens shes back together that all the intake piping is sealed up tight and using a good air filter. if in very dusty enviroment might try a prefilter on the air filter to.
Return to Top | find
replyreply
new reply


Messages In This Thread
RE: Crankcase pressure - Rawze - 04-06-2019,
RE: Crankcase pressure - Rawze - 04-08-2019,
RE: Crankcase pressure - Rawze - 04-09-2019,
RE: Crankcase pressure - Lonestar10 - 04-14-2019
RE: Crankcase pressure - Unilevers - 04-14-2019,
RE: Crankcase pressure - Rawze - 04-14-2019,
RE: Crankcase pressure - Rawze - 04-15-2019,
RE: Crankcase pressure - bwake - 04-15-2019,
RE: Crankcase pressure - bwake - 04-15-2019,
RE: Crankcase pressure - Rawze - 04-24-2019,
RE: Crankcase pressure - Rawze - 04-25-2019,
RE: Crankcase pressure - Unilevers - 04-25-2019,
RE: Crankcase pressure - Rawze - 07-21-2019,
RE: Crankcase pressure - Rawze - 07-22-2019,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication