Paccar
04-19-2019, (Subject: Paccar ) 
Post: #9
RE: Paccar
(04-19-2019 )schISM Wrote:  
(04-19-2019 )Rawze Wrote:  
(04-19-2019 )schISM Wrote:  ...
a 3.25 final ratio
...

swap it out for a decent set of 3:70's and it would do much better on fuel when loaded.

It’s got an 18 spd. so it’s always right where I need it to be. I’ve played around with different rpm’s at different speeds and it just likes the 13-1500 range 80,000 or empty.

u can disagree all u like, but it has been proven time and again. Getting better rear ratios puts more torque/hp to the wheels and not in the drive-line when loaded. Believe me when i say I have driven hundreds of trucks with hundreds of setups,.. those tall bastar#d rears u have there are garbage for anything but bobtailing around in.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: Waterloo


Messages In This Thread
Paccar - tsolson - 04-18-2019,
RE: Paccar - Rawze - 04-18-2019,
RE: Paccar - Lonestar10 - 04-18-2019,
RE: Paccar - smorgan87 - 04-18-2019,
RE: Paccar - Waterloo - 04-19-2019,
RE: Paccar - schISM - 04-19-2019,
RE: Paccar - Rawze - 04-19-2019,
RE: Paccar - schISM - 04-19-2019,
RE: Paccar - Rawze - 04-19-2019
RE: Paccar - Pete379 - 04-19-2019,
RE: Paccar - schISM - 04-20-2019,
RE: Paccar - Moose - 04-20-2019,
RE: Paccar - schISM - 04-20-2019,
RE: Paccar - Rounded_nut - 05-26-2019,
RE: Paccar - schISM - 05-26-2019,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.