| Ecm just failed |
| 04-22-2019, (Subject: Ecm just failed ) Post: #6 | |||
| |||
| RE: Ecm just failed Unplug the oem harness, and with key on test for voltage at the ECM supply pin. Cummins insite should have your wiring diagram for the PIN number/location. THIS WAY you know for sure if the ECM is getting power or not. The fuse could be good put the wire be corroded: if it’s bad enough the fuel primer pump will not activate and yoy will have abs and check engine lights. | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Ecm just failed - Rtrucking - 04-22-2019, RE: Ecm just failed - Nilao - 04-22-2019, RE: Ecm just failed - Rawze - 04-22-2019, RE: Ecm just failed - Moose - 04-22-2019, RE: Ecm just failed - Rtrucking - 04-22-2019, RE: Ecm just failed - Kid Rock - 04-22-2019 RE: Ecm just failed - MommaBurt - 04-22-2019, RE: Ecm just failed - Moose - 04-22-2019, RE: Ecm just failed - Rtrucking - 04-22-2019, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.