CM 871 won’t regen
05-05-2019, (Subject: CM 871 won’t regen ) 
Post: #10
RE: CM 871 won’t regen
IMAP reads 0 with key on because its 0 "Gauge" pressure and the Baro helps it stay 0'ed as the baro reads "Absolute" pressure.


use this example for Absolute and Gauge Pressure in PSI and you have the gauge in your hands.

Absolute Pressure - 14.7 PSI
Gauge Pressure - 0 PSI

Gauge is Absolute minus atmospheric pressure.

When i was in Ethanol you could tell these sensors apart on the DCS "The control systems" if a reading showed PSIA it was Absolute and PSIG was Gauge.
replyreply
 Thanks given by: Rawze , Waterloo , theironoracle , Hammerhead


Messages In This Thread
RE: CM 871 won’t regen - Lonestar10 - 05-05-2019
RE: CM 871 won’t regen - Unilevers - 05-05-2019,
RE: CM 871 won’t regen - Unilevers - 08-07-2019,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.