CM 871 won’t regen

[Lonestar10]

I dont know if the voltages will tell you anything. it could be that IMAP sees say 28.7 KPA and Baro sees 28.7 KPA and then computer just subtracts 28.7 from the IMAP and shows a 0 Readout.

Rawze is the electrical enginerd here with his kick ass toys like his new Arduino for testing turbos he would know better.

Only type of sensors/valves im used to using have constant voltages and use a 0 to 20 milliamp scale to send out their data. so in the computer system there would be a scale like this.

Say the scale is 0 to 200 PSI
0 Milliamp = 0 PSI reading

10 milliamp = 100 PSI reading

20 milliamp = 200 PSI reading