crank dampener marking

[alborz]

(05-07-2019 )Rawze Wrote:  sometimes I use sand paper to clear the rust and a small flashlight shining it at a steep angle to the surface to find them. - If you find only one of them, it is really easy to find the rest. - Simply use a paint marker of sharpie to put a line on the face in front of the one you found, then rotate the engine until the mark is facing straight down. The next mark will be somewhat close in the area where it has to line up.

I think if any letter (A, B, or C) represent two cylinders then all the circumference of the dampener is divided by 3 and 120' apart. like 3 slices of a pizza.