| Hot / Cold Blend door |
| 05-11-2019, (Subject: Hot / Cold Blend door ) Post: #6 | |||
| |||
RE: Hot / Cold Blend door (05-07-2019 )barf Wrote: It was a super "butcher" fix, but I had a black plastic HVAC part brake. I tried glueing it and it would just break. I ended up using a torch, yes fire!, and melted a screw right into it. Hasn't broken since! The black plastic melted and surrounded the screw, once cooled it was one solid piece again, metal re-enforced. Nice! | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Hot / Cold Blend door - Grizzly - 04-29-2019, RE: Hot / Cold Blend door - Grizzly - 05-07-2019, RE: Hot / Cold Blend door - Waterloo - 05-07-2019, RE: Hot / Cold Blend door - barf - 05-07-2019, RE: Hot / Cold Blend door - Grizzly - 05-11-2019 RE: Hot / Cold Blend door - Rawze - 05-07-2019, RE: Hot / Cold Blend door - Grizzly - 05-11-2019, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.