How to data link. (connect) to ISX CM2350

[Rawze]

(05-12-2019 )RyanC Wrote:  ... (Nexiq) ...Works well with Cummins, Detroit, cat, and international software. Also works with allison and wabco software. Haven't tried it on a Volvo yet.

It takes a little poking around in each program to get it set right as the main adapter but once I got it I haven't had to go change anything since. Just make sure ita plugged into same USB slot.

your post kind of implies that only the nexiq is versatile like that, so I though I would elaborate a bit.

I have used the inline with most all those softwares as well. For troubleshooting either will work in almost all cases, so for a truck owner, either is usually just as good. Only real limitation I found so far is that an Inline adapter will not flash an ECU file into a CAT engine. It however will certainly connect and get codes, etc. using the CAT and other softwares mentioned as a standard 'RP1210a compatible device' . - But like I said,.. a Nexiq is better suited for multiple engine models, or for non-cummins trucks.