Help for isx 15 valve clearence set up.

[Chamberpains]

Yep, when you're on A, B or C look at the matching cylinder numbers A = 1 or 6 B = 2 or 5 C = 3 or 4, grab one of the two cylinders rocker arms and if it rocks freely or able to move them, that's the one you're on to adjust. The other one will be tight.

Start on whichever one is loose first then continue the sequence from there. Just like Waterloo says to complete rotations of the engine will bring you right back to where you started. Remember to get a paint marker and mark your cylinders intake, exhaust, injector and jake as you complete them. It is really easy to forget what you've already done as you're doing it.