ABS issue 2008 ProStar
06-12-2016, (Subject: ABS issue 2008 ProStar ) 
Post: #2
RE: ABS issue 2008 ProStar
I would at least check to see if the bearings, lug-nuts, axle etc. was tight. Jack it up and check for play. -- Safety is always your first concern.

I had a friend that had a wheel seal replaced,.. He got ABS alarms after,.. and similar problems. 300 miles down the road, the nut backed off because the mechanic damaged the lock pins for the nut, and the wheel chewed throught the axle and he was very lucky he didn't flip the truck when it failed. -- The axle repair cost him another $3800 and 2 days down time for the mechanics mistake.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply


Messages In This Thread
RE: ABS issue 2008 ProStar - Rawze - 06-12-2016



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.