ABS issue 2008 ProStar |
06-13-2016, (Subject: ABS issue 2008 ProStar ) Post: #10 | |||
| |||
RE: ABS issue 2008 ProStar Bill, you got me, but all the problems went away when we swapped it out as did the codes. I believe it has had issues from the day I bought the truck. The ABS trailer light would sometimes come on, then it started as a regular thing, then the tractor ABS started, then we got to the situation I have now. Near as I can figure, this compass module has been dying a slow death. And here is the kicker, it is tied directly in to the datalink that also controls the ABS module. I should have the new module this week, I will know for sure once I install it. The ABS system checked out fine... The compass module was blowing the codes. I found this, page 23, cab J1939 compass and ABS effects... The ABS and compass modules are connected according to these schematics. http://bodybuilder.navistar.com/General/...s08339.pdf | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
ABS issue 2008 ProStar - Waterloo - 06-12-2016, RE: ABS issue 2008 ProStar - Rawze - 06-12-2016, RE: ABS issue 2008 ProStar - Waterloo - 06-12-2016, RE: ABS issue 2008 ProStar - Vin - 06-13-2016, RE: ABS issue 2008 ProStar - Waterloo - 06-13-2016, RE: ABS issue 2008 ProStar - Rawze - 06-13-2016, RE: ABS issue 2008 ProStar - Billdozer2 - 06-13-2016, RE: ABS issue 2008 ProStar - Waterloo - 06-13-2016, RE: ABS issue 2008 ProStar - Waterloo - 06-13-2016, RE: ABS issue 2008 ProStar - Waterloo - 06-13-2016 RE: ABS issue 2008 ProStar - Billdozer2 - 06-13-2016, RE: ABS issue 2008 ProStar - Waterloo - 06-13-2016, RE: ABS issue 2008 ProStar - snailexpress - 06-13-2016, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.