My Pete rebuild |
05-26-2019, (Subject: My Pete rebuild ) Post: #371 | |||
| |||
RE: My Pete rebuild the ecm has a flaw with the Actuator fault logic. It gets kinda whacky when your unplugging and plugging in actuators and you cannot prove that that is the culprit because some engines will stay in the derate even with the actuator plugged back in and have no codes. Some wont start firing the rear bank again even after 10+ minutes of run time after its plugged back in. If you want to isolate cylinders, do it in insite. Dont do it by plugging and unplugging actuators. uni | |||
|
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.