| Exhaust manifold bolts |
| 06-04-2019, (Subject: Exhaust manifold bolts ) Post: #1 | |||
| |||
| Exhaust manifold bolts Headed to see mr hagg to fix broken exhaust bolt.My question is should I use cummins bolts or some type of better aftermarket bolts.The reason I am asking this is motor was inframed exactly 2 years ago and about 170000 miles .Exhaust temps never go above 500 degree according to installed guage.I am assuming they were tourqed correctly when done by mr hagg .Why would one break in this short time and what can be done to prevent this in the future. User's Signature: when things are not going good ,I just want to go sit in a mud puddle and blow bubbles | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Exhaust manifold bolts - flonly - 06-04-2019 RE: Exhaust manifold bolts - Signature620 - 06-04-2019, RE: Exhaust manifold bolts - Mr Hagg - 06-04-2019, RE: Exhaust manifold bolts - Magard - 06-04-2019, RE: Exhaust manifold bolts - Signature620 - 06-05-2019, RE: Exhaust manifold bolts - Rawze - 06-05-2019, RE: Exhaust manifold bolts - Silverwolf - 06-08-2019, RE: Exhaust manifold bolts - Mr Hagg - 06-08-2019, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.