Teaching 74bassman how to do an inframe

[Rawze]

Monday (10th), tue(11th), not much got done. I think 74bassman was cleaning parts and doing things at his home, it rained a lot during those days too. Wednesday he spent some time cleaning up the block and got new main bearings installed.

Yesterday (13'th), I helped him install new liners, pistons, rod bearings, new cooling nozzles, anti-polish rings, head gasket, and head. - We torqued the head to 300 ft-lbs, so that it can sit over night and the head gasket crush before re-torquing it again in the morning. After that, We will turn the bolts another 90 degrees for the final head bolt settings.