Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Ask Your question... / Timing

new reply
Timing
06-18-2019, (Subject: Timing ) 
Post: #1
Lonestar10 Offline
HMR-Contrinbuting V.I.P.  (1213 Likes)  *****

 		Posts: 1,873
Joined: Oct 2018
Thanks: 13
Given 1213 thank(s) in 780 post(s)
Timing
Couple questions

If a cam gear slips does it retard or advanced typically?

If you retard the engine should you build more boost?

Besides supposed power losses does retarding the engine hurt it? Since I know advancing creates more heat and can crack engine pistons.

All questions are in relation to SOI and injection cam

User's Signature: 2010 Lonestar - CM871 - 13sp - 3.70s, 2016 T680 - cm2350 - 13sp - 3.36s - skateboarder
Return to Top | find
replyreply
new reply


Messages In This Thread
Timing - Lonestar10 - 06-18-2019
RE: Timing - Magard - 06-18-2019,
RE: Timing - ynot - 06-18-2019,
RE: Timing - Lonestar10 - 06-18-2019,
RE: Timing - smorgan87 - 06-19-2019,
RE: Timing - Lonestar10 - 06-19-2019,
RE: Timing - Rawze - 06-19-2019,
RE: Timing - smorgan87 - 06-19-2019,
RE: Timing - Waterloo - 06-19-2019,
RE: Timing - ynot - 06-19-2019,
RE: Timing - Lonestar10 - 06-19-2019,
RE: Timing - ynot - 06-19-2019,
RE: Timing - Waterloo - 06-19-2019,
RE: Timing - Rawze - 06-19-2019,
RE: Timing - Lonestar10 - 06-19-2019,
RE: Timing - Magard - 06-20-2019,
RE: Timing - Lonestar10 - 06-20-2019,
RE: Timing - Waterloo - 06-20-2019,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication