Rear structure |
06-23-2019, (Subject: Rear structure ) Post: #3 | |||
| |||
RE: Rear structure If you do that rear structure, the transmission has to come out. If you take the transmission out, you may as well do the clutch. On my ProStar I want to say the entire job was around $4000 at the dealership. And whenever you do a clutch, always do the rear structure, I know too many guys that installed a clutch and soon discovered an oil leak, Tear it all back out and wind up resealing the structure. A double whammy. The actual seal you are replacing is just a long string of O Ring rubber gasket, around $50. The rest is labor, I would shop around, and replace the clutch. About $1500 in parts and the rest is labor. Ball park, don't hold me to it, I don't buy clutches for a living. | |||
|
« Next Oldest | Next Newest » |
Messages In This Thread |
Rear structure - earnies2 - 06-23-2019, RE: Rear structure - Lonestar10 - 06-23-2019, RE: Rear structure - Waterloo - 06-23-2019 RE: Rear structure - Hammerhead - 06-23-2019, RE: Rear structure - earnies2 - 06-23-2019, RE: Rear structure - flatbed94kid - 06-23-2019, RE: Rear structure - earnies2 - 06-24-2019, RE: Rear structure - flatbed94kid - 06-24-2019, RE: Rear structure - Waterloo - 06-24-2019, RE: Rear structure - Hammerhead - 06-24-2019, RE: Rear structure - Waterloo - 06-25-2019, RE: Rear structure - Hammerhead - 06-25-2019, RE: Rear structure - Rawze - 06-25-2019, RE: Rear structure - Hammerhead - 06-25-2019, RE: Rear structure - Rawze - 06-24-2019, RE: Rear structure - Waterloo - 06-24-2019, RE: Rear structure - earnies2 - 06-24-2019, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.