CHanging rear end, paccar motor |
07-07-2019, (Subject: CHanging rear end, paccar motor ) Post: #4 | |||
| |||
RE: CHanging rear end, paccar motor I have a 13sp and brand new RS404 3.70s cost was 6,000 installed. running 60-70 rpms are 65mph around 1500 70 around 1600 and so forth. User's Signature: 2010 Lonestar - CM871 - 13sp - 3.70s, 2016 T680 - cm2350 - 13sp - 3.36s - skateboarder | |||
|
« Next Oldest | Next Newest » |
Messages In This Thread |
CHanging rear end, paccar motor - Rounded_nut - 07-06-2019, RE: CHanging rear end, paccar motor - Rawze - 07-07-2019, RE: CHanging rear end, paccar motor - Rounded_nut - 07-07-2019, RE: CHanging rear end, paccar motor - Lonestar10 - 07-07-2019 RE: CHanging rear end, paccar motor - Rounded_nut - 07-07-2019, RE: CHanging rear end, paccar motor - Rawze - 07-08-2019, RE: CHanging rear end, paccar motor - Rounded_nut - 07-09-2019, RE: CHanging rear end, paccar motor - Lonestar10 - 07-07-2019, RE: CHanging rear end, paccar motor - flatbed94kid - 07-09-2019, RE: CHanging rear end, paccar motor - Lonestar10 - 07-09-2019, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.