Brake chambers, the in's and out's
07-08-2019, (Subject: Brake chambers, the in's and out's ) 
Post: #9
RE: Brake chambers, the in's and out's
so i'm back after being in the shop. all of the brake chambers except the ones in the front were mixed up between 2.5 n 3 inch 30/30 chambers.... lol... someone didnt give a flying hoot what kind went on the truck i guess.

So volvo didnt have any 3 inch 30/30 brake chambers so i got the house brand " road choice ". Hopefully these will last longer then the old ones

While the mechanic was taking of the brake chambers 2 out 4 slack adjusters had bad bushings on them so i got 4 new ones from fleet pride and had them replaced also.

On my way back home, got brake checked by an idiot who was looking on his phone. lol.... fucking idiot. before if i applied a good amount of pressure to the brakes the tires would skip n jump. Not this time, they were firm and had a ton of grip.


User's Signature: The creator said " Help your self and I will help you; Protect your self and I will protect you "
replyreply
 Thanks given by: Waterloo , Volvo8873 , Rawze


Messages In This Thread
RE: Brake chambers, the in's and out's - Evotrucker - 07-08-2019



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.