| CHanging rear end, paccar motor |
| 07-09-2019, (Subject: CHanging rear end, paccar motor ) Post: #8 | |||
| |||
RE: CHanging rear end, paccar motor (07-08-2019 )Rawze Wrote:(07-07-2019 )Rounded_nut Wrote: Engine seems happy enough cruising there? Thanks for the links, been awhile since I read those. My only concern, and it's from ignorance, is at what rpm do I need to be concerned about valve float or damaging the pushrods, I want to say redline is 2200 rpm on the mx13 and I have no desire to say hello to a new window! | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
CHanging rear end, paccar motor - Rounded_nut - 07-06-2019, RE: CHanging rear end, paccar motor - Rawze - 07-07-2019, RE: CHanging rear end, paccar motor - Rounded_nut - 07-07-2019, RE: CHanging rear end, paccar motor - Lonestar10 - 07-07-2019, RE: CHanging rear end, paccar motor - Rounded_nut - 07-07-2019, RE: CHanging rear end, paccar motor - Rawze - 07-08-2019, RE: CHanging rear end, paccar motor - Rounded_nut - 07-09-2019 RE: CHanging rear end, paccar motor - Lonestar10 - 07-07-2019, RE: CHanging rear end, paccar motor - flatbed94kid - 07-09-2019, RE: CHanging rear end, paccar motor - Lonestar10 - 07-09-2019, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.