Cab air bag springs install on International.

[biscuits and gravy]

(06-22-2016 )in2trux Wrote:  Funny, those bags look the same as Pete. I also bought a small bottle jack but didn't have to use it.
I used a large crow bar and some leverage to extend the cab shocks and inserted blocks.

Did those bags have metal or plastic nipple?

Leave it to a dealer to build up the job!
Feels good to save $400-500, plenty of other things to buy.

Yep, plastic threaded nipples on top. Mine had a little lime green sticker with a warning with low torque settings.

Since I had no torque tools I decided to go German Finger Torque Tight and then air it up and check for leaks. Their holding good pressure so far. I'll keep an eye on them.