Running cylinder tests

[Lonestar10]

10-4 will order a set of feeler gauges and a 1/4 and 3/8 torque wrenches tonight and search for the posts/video for specs. already have a nice extendable 3ft 3/4 wratchet and 6in extension

replaced Balancer/radiator/put air cooler on trans/oil change/new reman ecm all on friday so atleast i already have balancer 1.6 tdc/pin insert/a-b-c paint markered for all the points for adjusting the valves.

i beleive its the angled feeler gauges that work the best right almost at an L?