Cm 870 cry for help

[Chamberpains]

You might as well just throw all those codes away. Most can be explained by bad programming. They shut off the signal to turn on the CEL but your engine is throwing the codes. Meaning, its screaming at you that things are wrong but you never see it.

When they flashed your ECM they should have cleaned all the codes out. We hope that Unilevers comes back with a clean bill of health for that program you have. Hopefully who ever did it doesn't do the same crap of suppressing the CEL.

Let us know what's going on after you run it for a bit and especially after you get Insite.