Cm 870 cry for help |
08-02-2019, (Subject: Cm 870 cry for help ) Post: #27 | |||
| |||
RE: Cm 870 cry for help Ok... The truck ran great last night after I got the boost leaks fixed and all that but was still a little rough at idle I figured I would pull the actuators apart today and clean them up with non chlorinated brake cleaner and check them out according to rawzes write up... I pulled them off one at a time and took them apart checked the step in the plunger all felt good just spring no delay... Put it back together and went on to the next one to all 4 I went to fire it up let the fuel pump cycle 2 times to reprime and got it started and it is 1000x worse.. where could I have messed up going back together with them? | |||
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.