Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / ISX Related Help / Cm 870 cry for help

new reply
Cm 870 cry for help
08-02-2019, (Subject: Cm 870 cry for help ) 
Post: #28
Rtrucking Offline
Established  (32 Likes)  **

 		Posts: 55
Joined: Sep 2018
Thanks: 1
Given 32 thank(s) in 17 post(s)
RE: Cm 870 cry for help
On the cm870 you have to let it run to get all the air out of the system if you do any work on the fuel system. The best way I have found is to let the prime (lift) pump run and press on the comuchuck fitting on the gear pump then start it and let it run it going to stumble for a few minutes then it should run better
Return to Top | find
replyreply
new reply


Messages In This Thread
RE: Cm 870 cry for help - Unilevers - 08-01-2019,
RE: Cm 870 cry for help - Rtrucking - 08-02-2019
RE: Cm 870 cry for help - Unilevers - 08-03-2019,
RE: Cm 870 cry for help - Unilevers - 08-09-2019,
RE: Cm 870 cry for help - ynot - 09-15-2019,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication