Cm2350 no power
08-05-2019, (Subject: Cm2350 no power ) 
Post: #1
Cm2350 no power
recently had inframe (liners, bearings oil pump pistons Cummins loaded head) everything but the Injectors . Now I'm having issues low power. I've rebuilt fuel pump head, replaced fuel rail pressure relief valve. Ran the leak down test on insite and Im loosing all fuel pressure in less than a minute. Did the cylinder cut out while monitoring fuel rail pressures on each.
All cylinders ran with a slight drop in rpms. Fuel rail pressure commanded and measured were pretty even.
What else should I check before replacing injectors?
replyreply


Messages In This Thread
Cm2350 no power - Tattoo76 - 08-05-2019
RE: Cm2350 no power - Tattoo76 - 08-06-2019,
RE: Cm2350 no power - Magard - 08-05-2019,
RE: Cm2350 no power - Tattoo76 - 08-06-2019,
RE: Cm2350 no power - Rawze - 08-05-2019,
RE: Cm2350 no power - Tattoo76 - 08-06-2019,
RE: Cm2350 no power - Magard - 08-06-2019,
RE: Cm2350 no power - Tattoo76 - 08-06-2019,
RE: Cm2350 no power - Rawze - 08-06-2019,
RE: Cm2350 no power - Tattoo76 - 08-06-2019,
RE: Cm2350 no power - Magard - 08-06-2019,
RE: Cm2350 no power - Magard - 08-06-2019,
RE: Cm2350 no power - Tattoo76 - 08-06-2019,
RE: Cm2350 no power - Rawze - 08-06-2019,
RE: Cm2350 no power - Tattoo76 - 08-06-2019,
RE: Cm2350 no power - Magard - 08-06-2019,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.