Cm2350 no power
08-06-2019, (Subject: Cm2350 no power ) 
Post: #22
RE: Cm2350 no power
(08-06-2019 )Tattoo76 Wrote:  
(08-05-2019 )trucklogger2 Wrote:  Is it a derate or just sluggish? Low boost? I would keep it simple at first and check seal on fuel/water separator ( maybe even multiple times if no change) then check charge air system.

I would suspect rail press Gauge if derate or injector maybe?
Just ideas there.

Not derate I'm positive of that, it pulls fine until I start pulling some hills then fall on its face. I have to drop some times down to 10th in PA and WV pulling tanker, 18sp 550 hp 3.42 rears

I would definitely try another fuel pressure sensor or press relief valve . Or try that hill again and monitor insite at the same time to try and pinpoint problem.


User's Signature: 36-25-34
replyreply


Messages In This Thread
Cm2350 no power - Tattoo76 - 08-05-2019,
RE: Cm2350 no power - Tattoo76 - 08-06-2019,
RE: Cm2350 no power - trucklogger2 - 08-06-2019
RE: Cm2350 no power - Magard - 08-05-2019,
RE: Cm2350 no power - Tattoo76 - 08-06-2019,
RE: Cm2350 no power - Rawze - 08-05-2019,
RE: Cm2350 no power - Tattoo76 - 08-06-2019,
RE: Cm2350 no power - Magard - 08-06-2019,
RE: Cm2350 no power - Tattoo76 - 08-06-2019,
RE: Cm2350 no power - Rawze - 08-06-2019,
RE: Cm2350 no power - Tattoo76 - 08-06-2019,
RE: Cm2350 no power - Magard - 08-06-2019,
RE: Cm2350 no power - Magard - 08-06-2019,
RE: Cm2350 no power - Tattoo76 - 08-06-2019,
RE: Cm2350 no power - Rawze - 08-06-2019,
RE: Cm2350 no power - Tattoo76 - 08-06-2019,
RE: Cm2350 no power - Magard - 08-06-2019,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.