Turning up torque

[jack0327]

(02-26-2016 )Rawze Wrote:  

(02-26-2016 )jack0327 Wrote:  I am looking at some fine tuning on a spread sheet at this stage.I've worked out my torque tables with 425Hp from 1150 to 1500Rpm and i have also droped the fueling tables slightly, What other things should i be looking at.
The engine is in good shape for its age and all this would be done after a tune up.

(RPM x Torque in N_m) / 7121 = Horsepower.

OR...

(RPM x Torque in Ft_lbs) / 5252 = Horsepower.

(RPM x Torque in Ft_lbs) / 5252 = Horsepower.
Then convert back to n_m