CM 871 won’t regen
08-07-2019, (Subject: CM 871 won’t regen ) 
Post: #53
RE: CM 871 won’t regen
(08-07-2019 )theironoracle Wrote:  Is it typical that the passive regens are less affective than a parked forced regen with insite?
Apples and oranges. Passive is when you're driving. Under load, accelerating. Drive with insite plugged in and you can watch the values. It's not 3.x all the time. That could be a momentary value while pulling a hill at 1600 rpm. It's showing the highest value recorded, not an average.


User's Signature: 2011 Prostar Cummins 871
replyreply


Messages In This Thread
RE: CM 871 won’t regen - Unilevers - 05-05-2019,
RE: CM 871 won’t regen - DosGatos - 08-07-2019
RE: CM 871 won’t regen - Unilevers - 08-07-2019,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.