Engine blow by
08-11-2019, (Subject: Engine blow by ) 
Post: #2
RE: Engine blow by
that is water in the oil. you might still see yet more water disapearing as you might have a liner that has broke loose and is leaking water into the oil. diagnose procedure is remove oil pan pressurize coolant system let sit over night after night lay under the truck looking up towards the cylinder bores and have someone bar the engine over and watch to see if water comes out of one of the bores or you hear a gurgling sound like water and air bubbling. if its not there than the check air compressor or anywhereelse water comes near the oil system.


User's Signature: 2010 Lonestar - CM871 - 13sp - 3.70s, 2016 T680 - cm2350 - 13sp - 3.36s - skateboarder
replyreply
 Thanks given by: Magard , Rawze , Signature620 , Waterloo


Messages In This Thread
Engine blow by - Khalid4747 - 08-11-2019,
RE: Engine blow by - Lonestar10 - 08-11-2019
RE: Engine blow by - Waterloo - 08-11-2019,
RE: Engine blow by - Brock - 08-11-2019,
RE: Engine blow by - Waterloo - 08-11-2019,
RE: Engine blow by - smorgan87 - 08-11-2019,
RE: Engine blow by - tree98 - 08-11-2019,
RE: Engine blow by - smorgan87 - 08-11-2019,
RE: Engine blow by - Rawze - 08-12-2019,
RE: Engine blow by - Waterloo - 08-13-2019,
RE: Engine blow by - smorgan87 - 08-13-2019,
RE: Engine blow by - smorgan87 - 08-13-2019,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.