Gear train
08-13-2019, (Subject: Gear train ) 
Post: #13
RE: Gear train
So I put a rebuilt compressor on. My old one was tired compression wise but tight. So gear backlash on new compressor was more than old compressor. Rattling noise seems to be loader and more consistent. Seems to have changed with new compressor. Compressor nick went away for now. Could this noise be backlash in compressor gear. Also I couldn’t get any perceivable movement in scissor gear.
replyreply


Messages In This Thread
Gear train - Magard - 08-04-2019,
RE: Gear train - Rawze - 08-04-2019,
RE: Gear train - Magard - 08-04-2019,
RE: Gear train - Unilevers - 08-04-2019,
RE: Gear train - Magard - 08-08-2019,
RE: Gear train - Nostalgic - 08-08-2019,
RE: Gear train - Unilevers - 08-08-2019,
RE: Gear train - Lonestar10 - 08-08-2019,
RE: Gear train - Mattman - 08-08-2019,
RE: Gear train - Magard - 08-09-2019,
RE: Gear train - Chamberpains - 08-09-2019,
RE: Gear train - Magard - 08-09-2019,
RE: Gear train - tree98 - 08-13-2019,
RE: Gear train - Magard - 08-13-2019,
RE: Gear train - Magard - 08-13-2019
RE: Gear train - Rawze - 08-13-2019,
RE: Gear train - Magard - 08-13-2019,
RE: Gear train - Waterloo - 08-13-2019,
RE: Gear train - Magard - 08-13-2019,
RE: Gear train - Magard - 08-13-2019,
RE: Gear train - Rawze - 08-13-2019,
RE: Gear train - Waterloo - 08-13-2019,
RE: Gear train - Waterloo - 08-13-2019,
RE: Gear train - tree98 - 08-13-2019,
RE: Gear train - Unilevers - 08-13-2019,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.