C15 6nz Inframe time
08-21-2019, (Subject: C15 6nz Inframe time ) 
Post: #17
RE: C15 6nz Inframe time
i would cut it, i can see the block fretting from here. Make sure you measure the new head for flatness.
replyreply
 Thanks given by: multitask , Brock


Messages In This Thread
RE: C15 6nz Inframe time - Unilevers - 08-18-2019,
RE: C15 6nz Inframe time - Unilevers - 08-21-2019,
RE: C15 6nz Inframe time - Unilevers - 08-21-2019



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.