| Where do I begin! |
| 08-23-2019, (Subject: Where do I begin! ) Post: #5 | |||
| |||
RE: Where do I begin! (08-23-2019 )Rawze Wrote: You seriously need to pull the valve cover and inspect the overhead cams before taking it anywhere. Rod/main bearings was done at a local shop in West Chicago about 200k miles ago. I'll definitely check the cams and adjust the valves if needed. When you have a moment, please PM me the shop's number you're recommending. Thanks again! | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Where do I begin! - UponARock - 08-22-2019, RE: Where do I begin! - hhow55 - 08-22-2019, RE: Where do I begin! - Lonestar10 - 08-23-2019, RE: Where do I begin! - Rawze - 08-23-2019, RE: Where do I begin! - UponARock - 08-23-2019 RE: Where do I begin! - Rawze - 08-23-2019, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.