Clutch replacement 870 without help

[tree98]

Yup going to be replacing my clutch and re sealing the rear structure. I probably won't have much help if any. I've been watching YouTube videos on clutch replacement and it seems like there are two different ways to install the clutch once the trans is out. One is to bolt it to the flywheel and then re install the trans. The other is to stack the clutch pieces on the input shaft of the trans then re install it and bolt the clutch to the flywheel through the access hole on the bottom of the trans barring the engine over to screw in each bolt. The videos did it the first way, but a lot of the comments said the second way is much much easier. What do you guys think is the best way?