| top end set |
| 09-07-2019, (Subject: top end set ) Post: #1 | |||
| |||
| top end set did top end set yesterday. I found when i checked detent clearance cylinder 2-6 were ranging from 50 to 65 thou. but number 1 was only 25 thou. barred engine over to be sure and still 25 thou. total clearance set to .276. so i adjusted detent clearance to 32 thou. using dial gauge is it ok to open up total clearance that far. | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
top end set - slowpoke - 09-07-2019 RE: top end set - Rawze - 09-07-2019, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.