rebuild vs swap decisions

[Ironsled]

THANKS GUYS
It has been a great experince being here and getting the chance to take all of it in . I have enjoyed every conversation I have had while being here and learning all I can .

Recap for today
leak down test on the fuel rail and injectors and found that injector #1 was leaking down bad. so thats the first on the list to change , along with a few other things that I would like to get done here and well since im here why not .

Injector #1------Replace
idler pully -------Replace
Belt tensioner--Replace X2
both belts-------Replace
rods and mains-Replace
oil pump--------Replace
Tie rod ends----Replace ( broiught them with me )
Front motor mounts--Replaved (brought)
egr Cooler (due to leak)
coolant hoses---x2

and when all that has been done and a and we got a good program back in it we will be ready to take that first ride to clear water MN to get that new trailer and let me tell ya after all the time down I am ready to roll like never before

BTW rawze's cooking and hospitalitghy is top Notch.