Testing Starter relay switch
09-14-2019, (Subject: Testing Starter relay switch ) 
Post: #7
RE: Testing Starter relay switch
(09-14-2019 )Magard Wrote:  
(09-14-2019 )Andre_The_Giant Wrote:  What’s the proper way to test the starter relay switch? Every now and then ill go to start up, I’ll hear a loud click then nothing happens(zero cranking). I key off, wait a bit, then try again and it usually works fine. I’m assuming this is the problem? My starter is only a year old and all of my wires and connections seem fine.

06 KW T800 cm870

Thanks in advanced for any input- Andre

Are you sure that is the starter solenoid? That looks like some other power source to the starter. The starter should have a solenoid that engages bendix gear and power the the starter motor.

The picture is of the Relay, should I be testing the solenoid instead?


User's Signature: I may be cross eyed, but i don’t cross thread
replyreply


Messages In This Thread
RE: Testing Starter relay switch - Andre_The_Giant - 09-14-2019



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.