2014 Pete 386
09-25-2019, (Subject: 2014 Pete 386 ) 
Post: #20
RE: 2014 Pete 386
(09-25-2019 )Chamberpains Wrote:  Check your wires to the sensor. They frequently get melted from being too close to the exhaust.


I will do that! Thanks
replyreply


Messages In This Thread
2014 Pete 386 - Casper - 09-22-2019,
RE: 2014 Pete 386 - Rawze - 09-22-2019,
RE: 2014 Pete 386 - Casper - 09-22-2019,
RE: 2014 Pete 386 - Waterloo - 09-22-2019,
RE: 2014 Pete 386 - Casper - 09-22-2019,
RE: 2014 Pete 386 - Casper - 09-29-2019,
RE: 2014 Pete 386 - Rawze - 09-22-2019,
RE: 2014 Pete 386 - Casper - 09-22-2019,
RE: 2014 Pete 386 - Waterloo - 09-22-2019,
RE: 2014 Pete 386 - Casper - 09-22-2019,
RE: 2014 Pete 386 - Lonestar10 - 09-22-2019,
RE: 2014 Pete 386 - SIDE_SHOW - 09-22-2019,
RE: 2014 Pete 386 - Casper - 09-22-2019,
RE: 2014 Pete 386 - Lonestar10 - 09-22-2019,
RE: 2014 Pete 386 - Waterloo - 09-22-2019,
RE: 2014 Pete 386 - Casper - 09-22-2019,
RE: 2014 Pete 386 - Lonestar10 - 09-22-2019,
RE: 2014 Pete 386 - Casper - 09-25-2019,
RE: 2014 Pete 386 - Casper - 09-25-2019,
RE: 2014 Pete 386 - Rawze - 09-25-2019,
RE: 2014 Pete 386 - Casper - 09-25-2019
RE: 2014 Pete 386 - Casper - 09-29-2019,
RE: 2014 Pete 386 - Casper - 09-29-2019,
RE: 2014 Pete 386 - Rawze - 09-30-2019,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.