Oil on IMAP plug

[Wiseman]

(07-03-2016 )TeaspoonSean Wrote:  Yes, it most likely is the engine brake plug, is there a simple solution to the oil building up inside its plug?

Indeed it is . Take the valve cover off . Remove the clip of the crossover engine brake harness connector. Pool it off and clean it really good from oil . And I mean really good . Absolutely no oil by any means. Use brake cleaner , blow air again and again until no oil is left behind!!!
Then find good epoxy capable of handling 300*F . Roll ring alike with masking tape around the part where wires go into the plug and cap it with epoxy. Let it cure . Put new O-rings and reinstall. From now on you'll not going to have any oil coming out of this thing ever !!!!