Cm871 oil pressure loss
10-04-2019, (Subject: Cm871 oil pressure loss ) 
Post: #16
RE: Cm871 oil pressure loss
Oil pressure is now 26 PSI at idle 39 going down the road with oil temperature at 190°. noticed when I tightened the P clamp it pulled the tube sideways in the pump inlet. I Elongated the holes and was cautious to keep tube in the center when tightening the clamp.Unfortunately I already had the pan on when I read your suggestion to delete the clamp. Thanks again!
replyreply
 Thanks given by: Signature620


Messages In This Thread
RE: Cm871 oil pressure loss - Murray Farms - 10-04-2019



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.