cm870 wont crank hot |
10-14-2019, (Subject: cm870 wont crank hot ) Post: #24 | |||
| |||
RE: cm870 wont crank hot Rawze suggestion regarding the releasing of fuel pressure after shut down would be worth pursuing. Fuel pressure test after shut down? I had a similar starting issue. Went through 4 starter motors, cables were replaced. Engine was rebuilt with a remanufactured head. Starting fault returned after a few months and the cause was a leaking injector cup in the head. Would start fine when the engine cooled. Brand new head and never had a starting issue again.... until the engine dropped a liner and put three holes in the block. Aftermarket main bearings were used during the rebuild and they were toast after 11 months/240,000km. | |||
|
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.