Cummins x15 torque spec

Rawze.com: Rawze's ISX Technical Discussion and more

New: Rawze's amazon Page

A big THANK YOU For those who have recently Contributed towards keeping the lights on around here. It helps keep the website costs at bay and goes towards helping others with their trucks.

I want to personally thank everyone who has donated to the forum recently. It helps pay for the $790/month internet bill that the forum consumes. - Thank you again.

YOU NEED AN INVITATION CODE TO Register! -- To obtain an invitation code, please e-mail [email protected] with a reason why you want to join. This keeps the spammers out and our forum clean.

Current time: 11-25-2024, | ShoutboxHello There, Guest! (Login — Register)

Threaded Mode | Linear Mode

Cummins x15 torque spec

10-16-2019, (Subject: Cummins x15 torque spec )

Post: #6

bigben Offline

Offline

Contributing Member (0 Likes)

Posts: 17
Joined: Dec 2018

Thanks: 3
Given 0 thank(s) in 0 post(s)

RE: Cummins x15 torque spec

(10-16-2019 )Waterloo Wrote: 35 ftlbs... It is right there in the oil pan installation instructions, bottom of page...

I don't know if you know about the Fumoto oil drain valves, but many of us here use them. I won't leave home without mine, lol. They are grease monkey proof, and made of solid brass. I have been using mine for quite a few years.

Here are the ones available for our Cummins oil pans... I use the 2-T11

http://fumotousa.com/results.php?make=14...X%2C+QSX15

You can get these at FleetPride, Amazon and I have seen them at a few dealership parts departments. Torque to 35ftlbs

Brother just take out the oil drain plug and put it on. Does it need special wrench. I don't want to over tighten it. Lol

Return to Top | find

« Next Oldest | Next Newest »

Messages In This Thread

Cummins x15 torque spec - bigben - 10-15-2019,

RE: Cummins x15 torque spec - tree98 - 10-15-2019,

RE: Cummins x15 torque spec - Waterloo - 10-15-2019,

RE: Cummins x15 torque spec - bigben - 10-16-2019,

RE: Cummins x15 torque spec - Waterloo - 10-16-2019,

RE: Cummins x15 torque spec - bigben - 10-16-2019

RE: Cummins x15 torque spec - Waterloo - 10-16-2019,

RE: Cummins x15 torque spec - bigben - 10-16-2019,

RE: Cummins x15 torque spec - rolling18 - 11-21-2020,

RE: Cummins x15 torque spec - Coronado126 - 11-21-2020,

RE: Cummins x15 torque spec - Mattman - 11-21-2020,

RE: Cummins x15 torque spec - rolling18 - 11-22-2020,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.

Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication

Powered By MyBB, © 2002-2024 MyBB Group | Theme by Laughing Inc - Web Design