Loss power, slow accelerating, turbo |
10-16-2019, (Subject: Loss power, slow accelerating, turbo ) Post: #3 | |||
| |||
RE: Loss power, slow accelerating, turbo * Could be an issue in the IFSM that is not an actuator. * Could be a programming issue. * Could be a bad ecm itself. * Could be a sensor reading incorrectly that is not throwing codes, like the altitude senso0r or other. * Could be slipped cam. * Could be a turbo or turbo controller problem. * Could be an air flow or exhaust flow issue. * could be worn out head/valve seat(s) causing lower then normal compression. -- here is someone else who has had similar issues ... read through the entire thread as it unfolds... http://rawze.com/forums/showthread.php?t...4#pid43684 Could be something really stupid like exhaust restriction... Has anyone bothered to disconnect the exhaust piping off the back of the turbo and take it for a spin to see if the power comes back? User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.