02 CM570 Signature Injector replacement and valve set question

[Waterloo]

(10-17-2019 )FrontlineLogistics Wrote:  Update: I let it run for 25 mins. No change. I’m going back to the overhead and see if I over tightened the valve lash. I also need to purchase a dial torque wrench and set the injectors as well

Pick up a little 1/4" beam torque wrench, easier to see when adjusting the 5 and 6 injectors. I have the CDI dial unit, the beam is much easier to use, at least on my ProStar up under the firewall/doghouse.

{picture added by Rawze}
https://amzn.to/2nQg3X4