What would you have done differently??
11-12-2019, (Subject: What would you have done differently?? ) 
Post: #78
RE: What would you have done differently??
(11-12-2019 )Hammerhead Wrote:  I don't have any real close up pics of the securement on these loads.
The new bucket is 14'4"W x 13'10"H x 18'L and weighs 109,000lbs (height is OTG, on the ground. Actual loaded height was 15'10".

The used bucket is 15'W x 14'H x 19'L and weighs 122,000lbs.

Both buckets were hauled on my rail/beam, so the actual under the load trailer width is 44"! This is a California legal 9 axle trailer, so it's lively! What does that mean? It rock and rolls constantly, so much so that heading north out of Vegas with the used one, the Lamborghini passing me slowed down to take pics/video of the load.
Each load had sixteen 1/2" chains with direct contact securement.

What would I have done differently if I was hauling it? Hmmm... Not kidding, I probably would've hired this Hamerhead fellow to crawl out from wherever he's put himself and instruct me on how the hell you move such pieces. Including him riding in truck with me the whole trip.

I'd say your on the front lines of semi-uncharted territory with a lot of your loads. I love seeing what all you get into. It'd be cool to see you start up a thread that you just showed what all you move. How it was done and problems you faced. You do a very fascinating job.
replyreply
 Thanks given by: Rawze


Messages In This Thread
RE: What would you have done differently?? - Chamberpains - 11-12-2019



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.