CM2350 Fuel Pump Rebuild Help
11-13-2019, (Subject: CM2350 Fuel Pump Rebuild Help ) 
Post: #2
RE: CM2350 Fuel Pump Rebuild Help
you do not have to remove the pump from the truck.

The electrical connector at the HPA (actuator on the pump) is glued and heat shrunk together. Follow the wires back towards the block you will find a connector further down to unplug.

you do not need to go anywhere near the guide pin plugs when removing the head. The tappets have machined grooves in them that let them pull out of the bore when the pump head is off.
replyreply
 Thanks given by: Golfnut , schISM , DSTdriver


Messages In This Thread
RE: CM2350 Fuel Pump Rebuild Help - Unilevers - 11-13-2019
RE: CM2350 Fuel Pump Rebuild Help - Unilevers - 11-13-2019,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.